Working Time: Mon - Fri 9:00 AM - 7:00 PM
Follow us:
Send Your Mail

[email protected]

Phone Number

07424 991504

Office Location

London

Repair

No heating, no hot water, a leak or an air con that won’t cool? We find the fault, explain it in plain English and aim to fix it first time

Things break at the worst times. Ajax Heating repairs boilers, central heating, basic plumbing and air conditioning across London, Harrow, Enfield/ Barnet and nearby areas. No-heat, no-hot-water and active leak calls come first, especially between October and March. When you call, tell us what’s happening and, for a boiler, the make and any fault code. It helps us bring the right parts.

Smell Gas? Do This First

Turn off the gas supply at the meter, open windows and doors, avoid switches and naked flames, and call the
National Gas Emergency number on 0800 111 999. Don’t use the boiler. Call that number first, not us.

Boiler Repair

Our Gas Safe registered engineers diagnose the fault and tell you the price before we start.

Common Boiler Problems We Fix

Why Is My Boiler Not Working?

Common causes include low pressure, a frozen condensate pipe in cold weather, a thermostat or timer problem, or a faulty part. Before you call, you can safely check the pressure gauge (it should usually sit between 1 and 1.5 bar when the system is cold), look for a fault code and check the thermostat and timer settings. Don’t open the boiler Ajax Heating | Installation, Service and Repair page content Page 13 casing. That’s a job for a Gas Safe engineer.

Repair or Replace?

If your boiler is old, breaks down often, or the repair is a large share of the cost of a new one, replacement can be better value. Under about 8 years old with a single fault, repair is almost always right. We’ll give you an honest answer either way.

Central Heating Repair and Power Flushing

Boiler fine but the house still cold? The fault is often in the system, not the boiler.

Common Central Heating Problems We Fix

When a Power Flush Is the Fix

Sludge and debris build up inside radiators and pipework over time. Signs include radiators that are cold at the
bottom, a noisy system, slow heat-up, discoloured water when you bleed a radiator, or a boiler that keeps cutting
out. A power flush cleans the system, improves efficiency and can extend the life of your boiler and radiators. We’ll
check first whether a flush will help or whether the problem is something simpler and cheaper.

Plumbing Repairs

Leaking pipes, dripping taps, blocked toilets or sinks, faulty valves, low water pressure or a radiator that won’t behave? We fix everyday plumbing problems quickly and tidily.

Burst Pipe or Major Leak?

Turn off the water at the stopcock, open taps to drain the system, switch off any affected electrics if it’s safe to, and call us on 07424 991504.

Common Plumbing Repairs

Air Conditioning Repairs

Air conditioning blowing warm air, making noise, leaking water or not switching on? We diagnose the fault, explain it clearly and repair it.

Common Air Con Problems We Fix

FAQ's

Frequently Asked Questions

Boiler Repair

How quickly can you fix a broken boiler?

We prioritise no-heat and no-hot-water calls. Call us with your boiler make and fault code and we’ll give you an honest slot.

Boiler repair costs depend on the fault and the parts needed. We diagnose first, tell you the price and don’t start repairs until you’ve agreed.

A boiler loses pressure because of a leak, a faulty pressure relief valve or an expansion vessel problem. Topping it up repeatedly isn’t a fix. A Gas Safe engineer should diagnose it.

Check the pressure gauge, the thermostat and timer, and any fault code, then call a Gas Safe engineer. If you smell gas, turn off the supply, open windows and call 0800 111 999.

No. Only a Gas Safe registered engineer may work on a gas boiler. You can safely check the pressure gauge, thermostat and fault code.

We repair all major gas boiler brands, whoever fitted them

Central Heating and Power Flush

Why are my radiators cold at the bottom?

Radiators that are cold at the bottom and hot at the top usually have sludge building up inside. A power flush or a radiator clean usually fixes it. If they’re cold at the top, trapped air is more likely and bleeding them helps.

A power flush uses a pump to push water through your heating system to remove sludge and debris. You may need one if you have cold spots, noisy pipes, slow heating or dirty water when bleeding radiators. We check first whether a flush will help.

A power flush cost depends on the number of radiators and the condition of the system.

The usual causes are a faulty zone valve, thermostat, programmer or pump, trapped air or sludge in the system. 

Turn the heating off, use a radiator key to open the valve at the top until the hiss stops and water appears, then close it and check the boiler pressure. If radiators stay cold, call us.

Plumbing Repair

What should I do if I have a burst pipe?

Turn off the water at the stopcock, open taps to drain the system, avoid electrics near the water and call us straight away.

Yes. Most dripping taps and running toilets need a new washer, cartridge or valve, and we can usually fix them in one visit.

We prioritise burst pipes and active leaks and aim to visit as soon as possible.

Air Conditioning Repair

Why is my air conditioning not cooling?

Common causes include dirty filters, blocked airflow, a faulty fan or a refrigerant issue. Switch it off and call us. Refrigerant work must only be done by a certified engineer.

A leaking air conditioner usually has a blocked condensate drain, but it can also be frozen coils or a poorly levelled unit. Switch it off and call us before it damages the wall or ceiling.

We repair all major air conditioning brands, whoever fitted them.

Ready to sort your heating?

or send us a quick enquiry.

Services

Other Services

© 2026 Ajax Heating. All rights reserved.